.. _getting_started: *************** Getting Started *************** This section will show you how to create a user with a SIP line. This simple use case covers what a lot of people need to start using a phone. You can use these steps for configuring a phone (e.g a softphone, an Analog-to-Digital switch or a SIP phone). This tutorial doesn't cover how to automatically provision a :ref:`supported device `. For this, consult the :ref:`provisionning section. ` We first need to log into the Wazo web interface. The web interface is where you can administer the whole system. .. figure:: images/step-01.png Logging into the Wazo When logged in, you will see a page with all the status information about your system. This page helps you monitor the health of your system and gives you information about your network. Please note the IP address of your server, you will need this information later on when you will configure your device (e.g. phone) .. figure:: images/step-02.png System informations To configure a device for a user, start by navigating to the IPBX menu. Hover over the `Services` tab, a dropdown menu will appear. Click on `IPBX`. .. figure:: images/step-03.png Menu IPBX Select the `Users` setting in the left menu. .. figure:: images/step-05.png Users settings From here, press on the "plus" sign. A pop up will appear where you can click on `Add`. .. figure:: images/step-04.png Adding a new line We now have the form that will allow us to create a new user. The three most important fields are 'First name', 'Last name' and 'Language'. Fill in the fields and click on `Save` at the bottom. For our example, we will create a used called 'Alice Wonderland'. .. figure:: images/step-06.png User information Afterwards, click on the "Lines" tab. .. figure:: images/step-07.png Lines menu Enter a number for your phone. If you click inside the field, you will see the range of numbers you can use. For our example, we will use '1000'. .. figure:: images/step-08.png Line information By default, the selected protocol is SIP, which is what we want for now. Click on Save to create the line. .. figure:: images/step-09.png Save We now have a user named 'Alice Wonderland' with the phone number '1000'. .. figure:: images/step-10.png User added information Now we need to go get the SIP username and password to configure our phone. Go back to the IPBX menu on the left, and click on 'Lines'. .. figure:: images/step-11.png Lines information You will see a line associated with the user we just created. Click on the pencil icon to edit the line. .. figure:: images/step-12.png Edit line We can now see the username and password for the SIP line. you can configure your phone using the IP for your server, the username and the password. .. figure:: images/step-13.png General line information