Community Supported Devices

The community supported devices are only supported by the community. In other words, maintenance, bug, corrections and features are developed by members of the Wazo community. Wazo does not officially endorse support for these devices.

xivo-provd plugins for these devices can be installed from the “community supported devices” repository.

Aastra

6700i and 9000i series:

Model Tested [1] Fkeys [2] Wazo HA [3]
6730i No 8 Yes
6753i Yes 6 Yes
6757i Yes 30 Yes
9143i Yes 7 Yes
9480i No 6 Yes
9480CT No 6 Yes

Alcatel-Lucent

IP Touch series:

Model Tested [1] Fkeys [2] Wazo HA [3]
4008 Extended Edition Yes 4 No
4018 Extended Edition Yes 4 No

Note that you must not download the firmware for these phones unless you agree to the fact it comes from a non-official source.

For the plugin to work fully, you need these additional packages:

apt-get install p7zip python-pexpect telnet

Avaya

1200 series IP Deskphones (previously known as Nortel IP Phones):

Model Tested [1] Fkeys [2] Wazo HA [3]
1220 IP Yes 0 No
1230 IP No 0 No

Cisco

Cisco Small Business SPA300 series:

Model Tested [1] Fkeys [2] Wazo HA [3]
SPA301 No 1 No
SPA303 No 3 No

Note

Function keys are shared with line keys for all SPA phones

Cisco Small Business SPA500 series:

Model Tested [1] Fkeys [2] Wazo HA [3]
SPA501G Yes 8 No
SPA502G No 1 No
SPA504G Yes 4 No
SPA508G Yes 8 No
SPA509G No 12 No
SPA512G No 1 No
SPA514G No 4 No
SPA525G Yes 5 No
SPA525G2 No 5 No

The SPA500 expansion module is supported.

Cisco Small Business IP Phones (previously known as Linksys IP Phones)

Model Tested [1] Fkeys [2] Wazo HA [3]
SPA901 No 1 No
SPA921 No 1 No
SPA922 No 1 No
SPA941 No 4 No
SPA942 Yes 4 No
SPA962 Yes 6 No

Note

You must install the firmware of each SPA9xx phones you are using since they reboot in loop when they can’t find their firmware.

The SPA932 expansion module is supported.

ATAs:

Model Tested [1] Fkeys [2] Wazo HA [3]
PAP2 No 0 No
SPA2102 No 0 No
SPA8800 No 0 No
SPA112 No 0 No
For best results, activate DHCP Integration on your Wazo.

Note

These devices can be used to connect Faxes. For better success with faxes some parameters must be changed. You can read the Using analog gateways section.

Note

If you want to manually resynchronize the configuration from the ATA device you should use the following url:

http://ATA_IP/admin/resync?http://WAZO_IP:8667/CONF_FILE

where :

  • ATA_IP is the IP address of the ATA,
  • WAZO_IP is the IP address of your Wazo,
  • CONF_FILE is one of spa2102.cfg, spa8000.cfg

Fanvil

Model Tested [1] Fkeys [2] Wazo HA [3]
C62P Yes 5 Yes

Gigaset

Also known as Siemens.

Model Tested [1] Fkeys [2] Wazo HA [3]
C470 IP No 0 No
C475 IP No 0 No
C590 IP No 0 No
C595 IP No 0 No
C610 IP No 0 No
C610A IP No 0 No
S675 IP No 0 No
S685 IP No 0 No
N300 IP No 0 No
N300A IP No 0 No
N510 IP PRO No 0 No

Jitsi

Model Tested [1] Fkeys [2] Wazo HA [3]
Jitsi Yes — No

Panasonic

Panasonic KX-HTXXX series:

Model Tested [1] Fkeys [2] Wazo HA [3]
KX-HT113 No — No
KX-HT123 No — No
KX-HT133 No — No
KX-HT136 No — No

Note

This phone is for testing for the moment

Polycom

Model Tested [1] Fkeys [2] Wazo HA [3]
SPIP320 No 0 No
SPIP321 No 0 No
SPIP330 No 0 No
SPIP430 No 0 No
SPIP501 Yes 0 No
SPIP600 No 0 No
SPIP601 No 0 No
SPIP670 No 47 No

SoundStation IP:

Model Tested [1] Fkeys [2] Wazo HA [3]
SPIP4000 No 0 No

Others:

Model Tested [1] Fkeys [2] Wazo HA [3]
VVX1500 No 0 No

Snom

Model Tested [1] Fkeys [2] Wazo HA [3]
300 No 6 Yes
320 Yes 12 Yes
360 No — Yes
820 Yes 4 Yes
MP No — Yes
PA1 No 0 Yes

Note

For some models, function keys are shared with line keys

Warning

If you are using Snom phones with HA, you should not assign multiple lines to the same device.

There’s a known issue with the provisioning of Snom phones in Wazo:

  • After a factory reset of a phone, if no language and timezone are set for the “default config device” in Wazo ‣ Configuration ‣ Provisioning ‣ Template device, you will be forced to select a default language and timezone on the phone UI.

Technicolor

Previously known as Thomson:

Model Tested [1] Fkeys [2] Wazo HA [3]
ST2022 No — —
ST2030 Yes 10 Yes

Note

Function keys are shared with line keys

Zenitel

Model Tested [1] Fkeys [2] Wazo HA [3]
IP station Yes 1 No
[1](1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18) Tested means the device has been tested by the Wazo development team and that the developers have access to this device.
[2](1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18) Fkeys is the number of programmable function keys that you can configure from the Wazo web interface. It is not necessarily the same as the number of physical function keys the device has (for example, a 6757i has 12 physical keys but you can configure 30 function keys because of the page system).
[3](1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18) Wazo HA means the device is confirmed to work with Wazo HA.
[4]These devices are marked as Not Tested because other similar models using the same firmware have been tested instead. If these devices ever present any bugs, they will be troubleshooted by the Wazo support team.